Share this article

Improve this guide

10 Ways to Fix Pool Corruption in File Area on Windows 10

Check the solutions that worked for most users

8 min. read

Updated onMarch 20, 2024

updated onMarch 20, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

BSoD, also known as stop error or exception error, indicates a system crash and the operating system can no longer operate safely. One of the common ones isPool Corruption in File Area.

Blue Screen of Deatherrors such as these can create many problems because they tend to restart your PC in order to prevent damage.

There are many causes for thePool Corruption in File Areaerror, thus, troubleshooting might take some time. To save time, read the information listed in the following sections and execute the solutions in the same sequence.

What is Pool Corruption in File Area?

As the name suggests,Pool Corruption in File Areais typically caused by corrupt or outdated drivers and software. Also, running an older version of the OS is found to be an underlying cause.

Incompatible or problematic hardware is also a likely reason behind encountering the BSOD error. Many reportedPOOL CORRUPTION IN FILE AREAdue to RAM issues.

Besides, third-party antivirus or misconfigured security settings have often been found to be the culprit, and it’s imperative that you look for these as well.

How do I fix the POOL_CORRUPTION_IN_FILE_AREA BSoD?

1. Use a 3rd party BSoD error fixer

Repairing delicate system files can be risky so it is always a good idea to employ the help ofprofessional repair software. These tools will scan your system and replace any broken files with fresh and genuine ones from their databases.

2. Run the Hardware troubleshooter

This is a built-in troubleshooter on Windows 10 and can help you resolveBSODerrors, includingPool Corruption in File Area. If this troubleshooter doesn’t fix the error or is not available, try running theHardware and Devicesone.

3. Run the SFC scan

SFCis a command-line tool that scans your computer for corrupt system files and, if any are found, replaces them with a cached copy stored on the drive. And since corrupt system files are a possible cause behind BSOD pool corruption, running the scan might help.

Once done, verify if thePool Corruption in File Areaerror is resolved.

4. Update your drivers

Searching fordriverscan be time-consuming. So, we advise you to use a tool that will do this for you automatically.

Outbyte Driver Updater will help you updatedriversautomatically and prevent PC damage caused by installing the wrongdriverversions.After several tests, our team concluded that this is the best-automatized solution.

⇒Get Outbyte Driver Updater

5. Run DISM

The DISM tool deploys the system image all over again, so it might resolve the BSOD issue on the way. Also, it would help if you are encounteringPool Corruption in File Areadue to thentoskrnl.exeprocess.

6. Download the latestWindows 10updates

Many operating systems have minor issues with certain hardware or software, and sometimes these issues can causeBlue Screen of Deatherrors to appear.

If you’re getting the POOL_CORRUPTION_IN_FILE_AREA error, we advise you to download the latest patches for the OS.

Many of these patches improve system security and fix both hardware and software compatibility issues, therefore, it’s important that you install them in order to preventBSoDerrors from appearing.

7. Remove your antivirus/firewall

Using antivirus programs and firewalls to protect your PC is essential, but sometimes they can causeBSoDerrors. If it’s the antivirus causing thePool Corruption in File Areaerror,uninstall the app.

Bear in mind thatWindows 10comes with Windows Defender, which works as your default antivirus, so your computer won’t be completely vulnerable even if you remove all other third-party antivirus tools.

We should mention that uninstalling your antivirus software might not be enough, so it’s advised to use aneffective uninstaller software. These tools remove all files associated with the antivirus, as well as any Registry entries created by it.

If removing your antivirus fixes the problem, you can now reinstall it or switch to a different program. In case you intend on switching, make sure to check thebest antivirus solutions for Windows 10right now.

8. Perform System Restore

System Restore is an effective troubleshooting technique when it comes to BSOD errors likePool Corruption in File Area.

When you perform a restore, the system is basically taken back in time. The changes will reflect across settings and installed apps, though the files won’t be affected.

9. Reset your PC

If System Restore didn’t fix the error, you might want to tryWindows 10 reset. This process is quite similar to a clean install, therefore, we urge you to back up your files and folders.

In case the error still appears even after the reset, it means that it is caused by your hardware.

10. Check for faulty hardware

Blue Screen of Deatherrors are often caused by faulty hardware, so be sure to check your RAM first. Make sure it’s properly seated, and there is no carbon or dust deposit on it. Removing and then reseating the RAM might do the trick.

If your RAM is working properly, check other major components, such as the motherboard and processor. Or a better option would be to get an expert to have a look.

How do I fix Pool Corruption in File Area on Windows 11?

ThePool Corruption in File Areaerror has managed to find its way into Windows 11, but the fixes for it are pretty simple and quick, given you have identified the underlying cause.

In case you are getting the error on a laptop, remove all devices and peripherals connected to it, and then replug them one at a time. After replugging each device, restart the computer and check if you encounter the error. As soon as you do, the device last connected is to blame for it.

For software-related issues, uninstalling the problematic app,manually updating the installed drivers, and running theDISMandSFCscan should help get things up and running.

How do I know if I have bad RAM?

A RAM doesn’t just start throwing errors all of a sudden. There are several signs that will help you identify a bad RAM early on and take the necessary measures to fix things.

First, if you notice reduced performance, it’s an indication of issues with the RAM. In this case, the programs may not run smoothly or even crash out of the blue. In extreme cases, bad RAM can cause the OS to crash as well with a BSOD error.

Also, if system files start getting corrupt and you are unable to fully operate Windows, it’s a sign that the RAM is failing. Besides, the system may also display incorrect RAM size in case of major issues with it.

By now, you would have thePool Corruption in File Areaerror fixed and can use your computer. In case it was malfunctioning or incompatible hardware, make sure to replace it to avoid issues in the future.

Also, do learn a general but highly effective approach to fixBSOD errors in Windows.

For any other queries or help with a particular method listed here, drop a comment below.

10 Ways to Fix Pool Corruption in File Area on Windows 10#

What is Pool Corruption in File Area?#

How do I fix the POOL_CORRUPTION_IN_FILE_AREA BSoD?#

1. Use a 3rd party BSoD error fixer#

2. Run the Hardware troubleshooter#

3. Run the SFC scan#

4. Update your drivers#

5. Run DISM#

6. Download the latestWindows 10updates#

7. Remove your antivirus/firewall#

8. Perform System Restore#

9. Reset your PC#

10. Check for faulty hardware#

How do I fix Pool Corruption in File Area on Windows 11?#

How do I know if I have bad RAM?#