Share this article

Improve this guide

A Problem Has Been Detected And Windows Shutdown: Fix

6 min. read

Updated onMarch 22, 2024

updated onMarch 22, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

Are you having problems withA problem has been detected and Windows has been shut downto prevent damage to your computermessage? This can be a serious problem, and in today’s article, we’ll try to help you fix it.

There are Windows errors and there it is, on a whole different level, theBlue Screen of Deathas an ultimate horror for every Windows user.

One of the most common errors that result in BSoD is followed by A problem has been detected and Windows has been shut down.

As you’re probably aware, the dreaded Blue Screen of Death is here since Windows 95. Now, even though a lot of things have changed in the period of 20 years, it’s still present and it still bothers a lot of users from time to time.

There are various reasons why something as bad as the BSoD will occur and in this case, our main suspect is the HDD.

On the other hand, due to a myriad of possible instigators, make sure to check all the provided steps in order to resolve the problem.

Read the next section and choose one of our recommendations to fix thea problem has been detectedblue screen error.

How do I fixa problem was detected and Windows was shutdownto prevent damage?

1. Use dedicated software

A problem has been detected and Windows has been shut down is a critical error. We recommend youdedicated softwareto make your computer perform like new.

2. Check HDD health

The BSoD error is mostly followed by the ”NTFS.sys” error. This, obviously, points towards the HDD.

Namely, it seems that Windows is trying to access the part of thesystem partition, but for some reason, it’s unable to do so.

Most of the time this happens due to the corruption of system files or corruption (bad sectors) of the HDD itself and results in, none other than the BSoD.

Therefore, what you’ll be addressing firstly is the HDD. If the issue is physical in nature and your HDD is unrepairable, we’re sad to inform you that you’ll need to replace it.

Luckily, that’s not always the case and maybe you can address it with the procedure above. Make sure to try it out and hope for the best.

However, you’ll be needing the installation media for this procedure with the Windows 10 setup.

If the problem is still persistent and you can confirm with certainty that the HDD isn’t the problem, make sure to move to additional steps.

3. Inspect hardware changes

Besides the HDD, almost every other replaceable PC component can be forcing Windows to shut down in order to prevent further damage. Now, this doesn’t always mean that something is malfunctioning.

In case your one of the essential components is ‘dead’, you won’t be able to boot in the first place. Meaning that compatibility is the problem here, rather than a defect. The focus here is, of course, on the CPU.

So, what’s the problem then? Well, if you installed the CPU or GPU which isn’t supported by your motherboard, the system will crash.

The disturbance of homogeneous system configuration will most certainly result in BSoD. So, what you’ll need to do is check whether your motherboard supports certain component.

Maybe your motherboard is indeed supporting the troubling component but it’s not up-to-date. This will require you toupdate your BIOS/UEFI.

Furthermore, make sure that everything is in its place. Shutdown the PC, and inspect the RAM placement. Sometimes you can change the socket and look for changes.

Moreover, make sure that your PSU (Power Supply) isn’t faulty and that PC isn’t constantly overheating.

Once you’re positive that everything is as it supposed to be, and system crashes keep reoccurring, move with the steps below.

4. Reset Windows 10

If you keep getting this error message, perhaps the problem is related to your Windows 10 installation. Your installation can get corrupted, and that can lead to this and many other problems.

To fix the issue, users are suggesting toperform a Windows 10 reset.

Bear in mind that this process can delete all your files from the system drive, so be sure to back them up beforehand.

5. Update drivers

Once we’re past the grave instigators of the problem at hand, let’s focus on lesser evil, or in this case, drivers.

The incompatible drivers or the drivers that aren’t properly installed can cause a variety of issues. Including the BSoD.

Now, most of the time the focus is on major devices and their drivers, but occasionally, even the peripheral device, like a printer, can cause the system crash.

So, we advise you to boot into Safe mode, navigate to Device Manager, and install proper drivers.

Moreover, if you’re using Windows 10, this procedure should be accompanied byblocking of drivers-related Windows Updates.

Windows 10 tends to install drivers on its own, and the generic drivers are not always the best-suited ones.

Updating your drivers can become a fast, simple and pleasant task if you use the right tool. After installation, this software will scan your computer and show you all missing, damaged or old drivers.

You will have access to a detailed report of your drivers, and you can also choose to download and install the newest ones. This is possible thanks to this tool’s huge daily updated database.

⇒Get Outbyte Driver Updater

6. Perform a clean reinstallation

Finally, if none of the previous steps proved fruitful, the only software-related solution that crosses our mind is a clean reinstallation.

Issues as large as this need a thorough approach and what’s more thorough than starting from a scratch.

If you’re not sure how to reinstall your system, we provideda detailed explanationso make sure to follow it closely.

We certainly hope that this was a helpful read and that, you’ll solve the A problem has been detected and Windows has been shut down error. Even more, we encouragetroubleshooting shutdown errors caused by apps in Windows, so take a closer look at our dedicated guide.

Furthermore, make sure to tell us about your experience with this error and share alternative solutions we haven’t provided. You can do so in the comments below.

A Problem Has Been Detected And Windows Shutdown: Fix#

How do I fixa problem was detected and Windows was shutdownto prevent damage?#

1. Use dedicated software#

2. Check HDD health#

3. Inspect hardware changes#

4. Reset Windows 10#

5. Update drivers#

6. Perform a clean reinstallation#