Share this article

Improve this guide

FIX: CRITICAL_OBJECT_TERMINATION error in Windows 10/11

7 min. read

Updated onMarch 22, 2024

updated onMarch 22, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

Blue Screen of Deatherrorssuch as CRITICAL_OBJECT_TERMINATION, can be caused by both hardware and software, and this is why these errors are sometimes so hard to fix.

SinceBSoDerrors can cause so many problems, today we’re going to show you how to fix this error on Windows 10.

How can I fix CRITICAL_OBJECT_TERMINATION BSoD error?

1. Repair your PC with a dedicated tool

A great idea for solving BSoD errors on Windows 10 is to restore your system to a healthier state, withspecialized softwarethat can also repair damaged files as well as keep you safe from dangerous websites.

These tools can automatically analyze your device for corrupted or damaged files and then repair them to restore normal operation.

2. Run the Hardware Troubleshooter

If updating your drivers didn’t resolve the problem, we’re going to use Windows 10’s troubleshooting tools.

The first tool we’re going to use is the built-in troubleshooter that can be found in the Settings app. You can use this tool to resolve all sorts of issues within the system, including BSODs.

3. Run the SFC scan

The next troubleshooter we’re going to try is the SFC scan. This is a command-line tool that goes through your system searching for potential issues.

Of course, if resolving these issues is possible, the SFC scan will do it automatically.

4. Update your drivers

Many BSoD errors are caused by outdated or incompatible drivers, therefore it’s important that update them in order to fix this error.

Updating drivers is fairly simple, and you can easily do it by visiting your hardware manufacturer’s website and downloading the latest drivers for your device.

Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically.

Using this automatic driver updater will scan your device right from the installation and provide you with an accurate report of all the elements that need to be updated, then download the missing patches in seconds.

⇒Get Outbyte Driver Updater

5. Run DISM

And the third troubleshooter we’re going to use is DISM. Deployment Image Servicing and Management (DISM) is a powerful tool that reloads the system image. So, it can also resolve potential BSOD errors.

We’ll walk you through both standard and the procedure that utilizes the installation media below:

6. Remove problematic applications from your PC

Third-party applications can often cause Blue Screen of Death errors, and users reported that Comodo Optimizer was the cause for the CRITICAL_OBJECT_TERMINATION error.

According to users, after removing the Comodo Optimizer the issue was resolved, so be sure to remove this software if you have it installed.

Another common cause for this error can be your antivirus or firewall, so we advise you to temporarily uninstall any third-party antivirus programs that you have installed.

Windows 10 comes with Windows Defender that works as a default antivirus, so even if you remove your third-party antivirus, your PC won’t be completely defenseless.

We have to mention that uninstalling the antivirus software might not fix the problem, so be sure to use a dedicated removal tool and remove all files associated with your antivirus.

If removing the antivirus fixed the problem, you can now reinstall your antivirus or you can switch to a different antivirus program.

You can alsoaccess the BSoD file log locationin order to find out the main reason why your PC crashed and what actual program is causing this annoying error.

7. Update your SSD firmware

Many users reported that the CRITICAL_OBJECT_TERMINATION error was caused by outdatedSSDfirmware, and in order to fix this error, it’s recommended that you update the firmware on your SSD.

Updating your firmware is an advanced procedure, and it can cause damage to your SSD if you’re not careful, therefore be extra careful if you decide to update SSD firmware.

8. Disable TRIM on your SSD

According to users, disabling TRIM can sometimes help you with CRITICAL_OBJECT_TERMINATION error. Bear in mind that this is just a workaround, but it might be helpful to you.

9. Turn off Hotplug for SATA devices

Few users reported that theCRITICAL_OBJECT_TERMINATION BSoD this issue can be fixed by turning off Hotplug for SATA devices in BIOS.

To see how to enter BIOS and how to turn off Hotplug for SATA devices, we strongly advise you to check your motherboard manual for detailed instructions.

We also recommend you stay informed on the factors that usually are at the root of this problem. Check out this ultimate guide on all thecauses that generate the BSoD error.

10. Check your swappable SATA board

Many SSD drives come with swappable boards that you install on your PC and use to connect your SSD.

Sometimes these boards might stop working, and you’ll have to replace the faulty SATA board with a new one. Alternatively, you can just connect your SSD directly to the SATA port on your motherboard.

11. Set the Drive mode to ATA in BIOS

Sometimes CRITICAL_OBJECT_TERMINATION error can be caused by certain BIOS settings, most commonly Drive mode.

According to users, you need to change the Drive mode in BIOS to ATA in order to fix this error. For detailed instructions, we strongly suggest that you check your motherboard manual.

As an alternative solution you can also try some high-quality specialized software that can get you out of the predicament, so you should take a look at thisarticle on the best BSoD repair tools.

12. Replace your SATA cables

Few users reported that this error was caused by SATA cables, and according to them, replacing the SATA cables fixed the Blue Screen of Death error, therefore we strongly advise you to check and replace your SATA cables.

CRITICAL_OBJECT_TERMINATION BSoD error is often caused by your hard drive or SSD, and if you’re having this problem, we strongly suggest that you try some of our solutions.

FIX: CRITICAL_OBJECT_TERMINATION error in Windows 10/11#

How can I fix CRITICAL_OBJECT_TERMINATION BSoD error?#

1. Repair your PC with a dedicated tool#

2. Run the Hardware Troubleshooter#

3. Run the SFC scan#

4. Update your drivers#

5. Run DISM#

6. Remove problematic applications from your PC#

7. Update your SSD firmware#

8. Disable TRIM on your SSD#

9. Turn off Hotplug for SATA devices#

10. Check your swappable SATA board#

11. Set the Drive mode to ATA in BIOS#

12. Replace your SATA cables#