Share this article

Improve this guide

Fix: MSRPC STATE VIOLATION error in Windows 10/11

7 min. read

Updated onMarch 19, 2024

updated onMarch 19, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

Blue Screen of Deatherrors can be quite serious, therefore it’s important to know how to properly fix them. Since BSoD errors can cause many problems, today we’re going to show you how to fix the MSRPC_STATE_VIOLATION error on Windows 10.

How do I fix MSRPC_STATE_VIOLATION BSoD error

1. Run a third-party BSoD troubleshooter

Especially if you don’t know how to tackle blue screen errors, there are a couple ofdedicated toolsthat can do the job for you. You might have to install and run them in Safe Mode.

2. Run the Hardware Troubleshooter

3. Run a SFC scan

TheSFCis a command-line scanning tool that scans your computer for potential issues and resolves them along the way. A lot of users have reported that the SFC scan can be useful when dealing with BSOD issues in Windows 10.

4. Install the latest Windows 10 updates and download the latest drivers

Although updating drivers by using Device Manager is fairly simple, many users are complaining that Device Manager doesn’t always download the latest drivers.

If you want to download the latest drivers for your hardware, you’ll have to download them manually. To download your drivers manually just visit your hardware manufacturer’s website and download the latest driver for your device.

4.1 Update drivers automatically

Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically.

Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.

These tools are software that you can use to detect missing or outdated drivers. With just one click, you will get all the necessary details on the main dashboard.

From there, you have several further actions that you can take: either update one driver or several, depending on your needs.

Additionally, it is easy to set up and use and saves you a lot of trouble with guessing the right drivers.

⇒Get Outbyte Driver Updater

5. Run DISM

DISM stands for Deployment Image Servicing and Management, and as its name says, it reloads the system image, which can lead to solving potential BSOD issues.

6. Remove/reinstall your antivirus software

Antivirus software is important for your online safety, but sometimesantivirus programscan cause the MSRPC_STATE_VIOLATION error to appear.

According to users,AVGis the cause for this error, but bear in mind that almost any other antivirus software can cause these types of errors to appear, so be sure to remove all third-party antivirus software that you have installed.

Uninstalling the antivirus program might not be enough, since many of these programs tend to leave certain files behind even after you remove them, therefore we advise you to use a dedicated removal tool.

Almost all antivirus companies offer dedicated removal tools for their software, so be sure to download one of these tools for your antivirus.

After you remove your antivirus,Windows Defenderwill automatically turn itself on, thus keeping your computer protected from viruses.

If the problem is fixed by removing your antivirus software, we advise you to install the latest version of the antivirus program that you were using before, or to switch to a different antivirus solution.

7. Perform a clean boot

When your computer restarts check if the error still persists. If the error doesn’t manifest, it means that one of the disabled applications or services was causing it.

To find the problematic application you need to repeat the same steps and enable services and applications one by one until you find the one that is causing this problem.

8. Reset Windows 10

This procedure will delete all files and folders from your C partition, therefore we urge you to back up your important files. To perform Windows 10 reset, you might need a bootableUSB flash drive, so be sure to create one. To reset Windows 10, do the following:

After the reset is completed, you should have a clean installation of Windows 10 without any third-party applications. If the error appears again, it means that there’s a hardware problem with your PC.

9. Check for faulty hardware

Hardware components can often cause BSoD errors, especially if they aren’t compatible with your PC, therefore we advise you to remove any recently installed hardware.

If the problem isn’t new hardware, then you should check for faulty components. Many users reported that a faulty hard drive caused this error, so check your hard drive first and then check all other hardware components.

MSRPC_STATE_VIOLATION Blue Screen of Death error isn’t that serious, and we hope that you managed to fix this error by using one of our solutions.

Fix: MSRPC STATE VIOLATION error in Windows 10/11#

How do I fix MSRPC_STATE_VIOLATION BSoD error#

1. Run a third-party BSoD troubleshooter#

2. Run the Hardware Troubleshooter#

3. Run a SFC scan#

4. Install the latest Windows 10 updates and download the latest drivers#

5. Run DISM#

6. Remove/reinstall your antivirus software#

7. Perform a clean boot#

8. Reset Windows 10#

9. Check for faulty hardware#