Please Power Down And Connect The PCIe Power Cables [Solved]

Make sure the all the pins are connected

4 min. read

Published onJanuary 24, 2024

published onJanuary 24, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

While recently turning on one of our PCs, we came across thePlease Power Down And Connect The PCIe Power Cable(s) For This Graphics Carderror. The PC worked fine the day earlier and didn’t show any signs of hardware malfunction.

On further investigation, it appeared that the error usually appears due to incompatible or loose cables, improper connections, issues with the PSU (Power Supply Unit), problematic BIOS, or a defective GPU. Also, it usually affected RTX 2060, GTX 1650, GTX 1060, and GTX 1080.

To start with, make sure the connections are in order, the PCIe cable is connected both to the GPU and PSU, and all the pins are plugged in. If the connection is loose, you will see a red light on the GPU. When connected properly, the light will turn white.

How do I fix thePlease power down and connect the PCIE power cableserror?

1. Use the on-board graphics (workaround to boot the PC)

First, you could remove the external graphics and boot the PC with the onboard graphics. This will allow you to access Windows androll back the driverif that caused the problem in the first place, though it’s highly unlikely.

If that doesn’t work or you didn’tupdate the graphics driverrecently, the problem either lies with the connections, GPU, or PSU.

2. Check the GPU’s requirement

Every GPU is designed to work with a PCIe cable that has a specific number of pins, 6 or 8, and each has to be connected for effective functioning.

A 6-pin cable power cable delivers up to 75 Watts, while an 8-pin cable delivers a maximum of 150 Watts. So, check the GPU’s requirement and use one accordingly.

Remember, it’s best to use the cables provided with the GPU. Besides, if you see some additional pins dangling around, connect them as well. This worked for 3 out of 5 users facing thePlease Power Down And Connect The PCIe Power Cable(s) For This Graphics Carderror withNVIDIA GeForce GTX 960.

Lastly, do not forget to verify whether your PSU is able to supply the required power to the GPU. For that, check both the PSU’s and cable’s specifications.

3. Re-insert the CMOS battery

Removing and re-inserting the CMOS battery resets the BIOS to default. Also, if you are not confident with the procedure, we recommend contacting a professional. Any mistakes during it may damage the other components.

4. Reflash the BIOS

Another fix that worked for many of our readers was toreflash the BIOS. This requires a USB drive and the version of the BIOS that matches the motherboard’s model. You should be able to find one on the computer manufacturer’s website.

The process is complex and may take a few minutes to several hours to complete. Practice extreme caution and have the computer connected to a stable power supply throughout. Also, if you faceBIOS corruption, that, too, can be fixed!

5. Contact a hardware professional

If nothing works or you are unsure of some of the solutions listed here, it’s best to contact the manufacturer (if your device is still under warranty) or a hardware professional.

They will ideally test every component individually and replace the malfunctioning one.

In our experience, more often than not, it’s a broken GPU or improper connections to blame. For us, it was the GPU, and we had to ultimately replace it!

If it comes to that, discover thebest graphics card compatible with Windows 11and get one right away!

For any queries or to share what worked for you, drop a comment below.

Please Power Down And Connect The PCIe Power Cables [Solved]#

How do I fix thePlease power down and connect the PCIE power cableserror?#

1. Use the on-board graphics (workaround to boot the PC)#

2. Check the GPU’s requirement#

3. Re-insert the CMOS battery#

4. Reflash the BIOS#

5. Contact a hardware professional#