Roku Error 014.30: How to Fix it

How about a faster network band for a seamless connection?

5 min. read

Updated onFebruary 26, 2024

updated onFebruary 26, 2024

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

Streaming on Roku is great, but not so much with an error 014.30 when it fails to connect to your home network. It’s worse when other apps or devices have no problem, but fret not, as we were able to get to the bottom of this problem and bring you this comprehensive guide.

Causes of Roku error 014.30:

How do I fix error code 014.30 on Roku?

A few basic troubleshooting steps to get you started include:

1. Restart Roku

2. Switch to a faster GHz band

Error 014.30 on Roku can happen when your wireless signal isn’t strong enough, so we recommend switching to a faster frequency. Also, connecting your device directly to your modem/router with an Ethernet cable will help bridge the gap where your wireless connection fails.

3. Remove bandwidth limits

If your ISP has set bandwidth limits, this can cause problems with streaming services and may report an error code similar to this one when you try to use more than your allotted amount.

4. Reset your network

5. Factory reset Roku

6. Change your network’s SSID

If you have recently changed the name of your wireless router or had problems with your router, then this could be the cause of the issue. This is because Roku uses a list of predefined names to connect to the Internet, and if one of these names is not found, it will not work correctly.

7. Renew your IP address

In some cases, even with a good and stable internet connection, you’ll find thatRoku is connected to Wi-Fi but not working. This could imply that the error 014.30 is caused by incorrect configuration settings on your router or your ISP has changed or updated its IP addresses.

If, at this point, you’re still struggling with the error, there’s a high possibility that your firestick is faulty. However, before you are quick to purchase a new one, give it time and try it in a few days. Some users were hasty in throwing away theirs, but the new one was still plagued with the same error.

Connection errors are awful as you may also beunable to screen mirror your Roku. If so,consider using Roku on a browserand see if it works. Sometimes, the error code 014.30 is app-related and will be resolved later. This can be a temporary solution as you wait for official updates.

We also have a guide that explainswhat is Cloud Path error authorization, so visit it if you have additional problems.

We’d like your thoughts on this error if you’ve experienced it. Leave your comments below on what solutions worked for you.

Roku Error 014.30: How to Fix it#

How do I fix error code 014.30 on Roku?#

1. Restart Roku#

2. Switch to a faster GHz band#

3. Remove bandwidth limits#

4. Reset your network#

5. Factory reset Roku#

6. Change your network’s SSID#

7. Renew your IP address#