Solved: Bluetooth Slows Down Wi-Fi on Windows 11

No choosing between Bluetooth and Wi-Fi with different bands

4 min. read

Updated onOctober 15, 2023

updated onOctober 15, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

If you’ve ever connected a Bluetooth device and noticed your Wi-Fi speeds slow down, you should know this is a normal occurrence. Most of the time, they don’t have any real issues with each other.

And while the issue gets worse as you connect more devices to Wi-Fi or add more Bluetooth devices, you don’t have to be stuck with a poor internet connection as there are ways around it.

Why does my Wi-Fi go slow when I use Bluetooth headphones or speakers?

Because both Bluetooth and Wi-Fi use the same spectrum of the 2.4 GHz frequencies. If you connect a Bluetooth device and it happens to be on the same frequency as your Wi-Fi, it can cause interference with your Wi-Fi network.

The situation worsens when you have a lot of devices using the same frequency band, leaving less bandwidth for your Wi-Fi router to use for its data traffic. This in turn results inslow Wi-Fi on your PC.

How do I stop Bluetooth from interfering with my Wi-Fi?

Before tweaking any settings, try the following basic steps:

1. By using a different band for Wi-Fi and Bluetooth

Also, ensure your router supports the 5GHz band, as most older routers operate the 2.4GHz band.

2. By using a different Wi-Fi channel

3. By using a dual/tri-band router

If you can afford one, it’s always better tobuy a dual or tri-band routerinstead of a single-band one. You may notice yourconnection keeps dropping while downloadingbecause devices are competing for available bandwidth.

A dual-band router allows you to operate two frequencies simultaneously as opposed to just one frequency, like in single-band routers. This way, there will be less interference between the two frequencies and, thus, better performance overall on both networks.

4. By using a Wi-Fi extender

Another great solution isusing a Wi-Fi extender. Aside fromboosting your router’s signal strengthin areas where it’s weak, it can also reduce interference with other devices in your home, such as your microwave or cordless phone.

This will give your devices more space without causing interference between them. You’ll also get better coverage throughout your home and an extended range outside of it.

Just ensure that any additional access points use the same frequency band as your existing router and are different from your Bluetooth devices.

Can I change the Bluetooth frequency?

The operating frequency of a Bluetooth device is set during its manufacturing process and cannot be changed by users. You can probably get around this limitation with software, but the main reason for this limitation is that different frequencies have different ranges.

This means that if you change the frequency of your device, it may not be able to communicate with nearby devices on the new frequency since 2.4 GHz is the default standard.

At the end of the day, this isn’t something to get too concerned about. If you want to use Bluetooth and Wi-Fi, simply shut off one when you aren’t using it. Moreover, you can always rotate these devices if you need to use them for different purposes at different times.

Have you encountered this issue before, and if so, what solution would you say is your go-to? Share with us in the comment section below.

Solved: Bluetooth Slows Down Wi-Fi on Windows 11#

How do I stop Bluetooth from interfering with my Wi-Fi?#

1. By using a different band for Wi-Fi and Bluetooth#

2. By using a different Wi-Fi channel#

3. By using a dual/tri-band router#

4. By using a Wi-Fi extender#

Can I change the Bluetooth frequency?#